123.hp.com/envy7640

HP Envy 7640 Unboxing

• Initially, lift the new printer box and keep it on a flat surface.
• Search for the electric socket connection and place the printer connection near to it. Try to avoid the surge or external extension to link the printer to the wall outlet.
• Try to ensure that you have removed all the packing materials from the printer & its accessories.
• Check whether the printer accessories are proper and look for any physical damage.
• Slowly, remove the bubble wrappers on the printer’s screen and move on with the below steps.

HP Envy 7640 power connection

• Before starting the interface connection, make sure the cables and network are stable throughout the procedure.
• On the other hand, have support using the HP Manual guide to start the connection & configuration process via USB cables.
• Further, you need to confirm with the ports and their requirements using the HP manual support.
• If required directly interface the New Ethernet or USB cables from the 123.hp.com/envy7640 printer’s backside to the wall outlet.
• Confirm whether the printer setup is under intact connection and turn ON the power button to proceed next.

HP Envy 7640 ink cartridge installation

• Gently remove the packing materials from the ink cartridges and carry them out using the below steps.
• Then, try to remove all the protective covers on the HP Ink cartridges and start the ink cartridge installation through the given below steps.
• Try to eradicate the vent from the ink cartridges to stay away from the HP Envy 7640 not printing issues while operating. Slowly twist and pull inward to insert the ink cartridges into the slot.
• If needed, utilize the Manual to insert the ink cartridges deeply until you notice a click-sound.
• Make sure the installation is proper and close the ink cartridge carriage access door safely. 

HP Envy 7640 Paper Loading

• Gently, open the 123.hp.com/envy7640 printer’s input tray access door to load the essential paper sheets and begin the printing job.
• Try to take the quality or recommended quality or size to load the input tray.
• Use the guides to adjust the paper sheets at the corner for the best start-up.
• Try to avoid loading the excess sheets that lead to troubleshooting in the future.
• Firmly shut the access door by leaving the output tray unclosed.

HP Envy 7640 USB Setup

• Prefer to use the given USB cables on the 123.hp.com/envy7640 printer box.
• Gently, unpack the wrapped covers from the cables to begin the printer setup.
• Make use of the HP Printer given USB cables to escape from the connection issues during the print work.
• Look at the new USB cables for any sort of visible damage. If seen, try to get them a new one or replace it.
• Start the USB setup in two ways, either you can prefer the interface mode in the beginning setup. Or else, prefer the connectivity mode at the end of the driver installation process. 
• Simply, follow the given on-screen prompts to connect the rear end to the printer port and the other end to the electric socket.
• Always prefer to disconnect or connect the USB cables after the installer's knowledge.

HP Envy 7640 Scan Setup

• Initially, you need to ensure the printer setup and download the HP Smart app from the app-store.
• Link through the home page to add the printer to the application. Hit the plus-sign at the top corner and wait for the next page which consists of on-screen prompts to guide you.
• Then, make sure the 123.hp.com/envy7640 printer is registered to the home page using the printer’s name & icon on it.
• Move on with the scan settings on the next page.
• Further, connect through the scan settings page and modify the required changes and give OK.
• Gently lift the scanner bed and clean out the dirt using the cotton pad or wet wipes to place the scanning document over the scanner glass top.
• Now, connect through the screen settings and check the preview option. If needed, modify the scan settings like page layout and other resolutions. Hit the scan option to confirm the scanning process.